Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

Bench coupler for testing servo response, joint drift, and load behavior before replacing actuator hardware.

Fan matrix that balances thermal spikes across compact power corridors.

Protected chest logic core with low tactical glow and no readable text. Designed for CX Commando security variants.

A precision astrogation panel and sensor suite for high-speed route work.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for actuators workflows.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

A compact hull-seal welding head mounted close to the repair bay.

A certified shop-use weld module for structural patching, bracket repair, and controlled metal joinery.

A stabilization module for damaged ship attitude control and return-path planning.

A compact stabilizer for emergency route correction, landing approach, and ship drift events.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

A hardened memory-bank module that stores edit snapshots, intake versions, policy decisions, and record correction history.

Waist or rear hip battery sled with protected casing. Designed for S1 Infantry combat variants.

Emergency reserve bank for mission-critical reboot windows and med-bay continuity.

Chest or forearm badge-reader panel with unreadable abstract scan blocks. Designed for KX7 Security security variants.

Small credential reader mounted near chest or support hand. Designed for S1 Infantry combat variants.

A cartridge-style gyro insert for safer rolling motion and obstacle negotiation.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for actuators workflows.

Broad but close-mounted barrier support brackets near forearms/torso. Designed for S2 Heavy combat variants.

A removable diagnostic sled for testing cells, governor state, and connector health during service intake.

Adapter sled for testing compact power cells, backup packs, and removable battery trays during repair intake.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

Heavy visible repair arms for damage-control access, emergency patching, and stubborn shipboard faults.

Compact underside or rear relay emitter with blue-white burst beacon. Designed for PRB-7 Probe security variants.

A compact floor-level probe for tracing cable paths, conduit breaks, and hidden service-channel faults.

A slim PT-3 precision wand and dock for quick sensor, actuator, latch, and connector calibration checks.

Mag-lock spanner set for bench calibration and field adjustment tasks.

Oversized dock clamps mounted to the loader hands or forearms for secure crate handling.

Durable grip pads on the palms, forearms, and boot edges for safer material handling.

Docking latches and carrier hooks for securing SVR-100 to salvage sleds and depot rigs.

Close-fitting ceramic panels around exposed intake, body, and leg-adjacent heat zones.

Thermal tile for vent channels, med bays, and compact reactor housings.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for p3-0 attachment-kit coverage.

A formal event-flow projector for processions, introductions, seating order, and ceremonial timing.

Data, records, relay, or coordination component for cleaner routing, stronger audit trails, and dependable communications. Tuned for ra-9 attachment-kit coverage.

A protected records core that preserves provenance, handoff history, edit snapshots, and ownership trails.

A short-range dock handshake and power-repeat module for cleaner autonomous returns to service bases.

Small forearm or chest scan plate with abstract indicator lights. Designed for S1 Infantry combat variants.

A clinical recorder for procedure notes, handoff summaries, and decision trace.

A secure adapter for pilot alert routing and cockpit state synchronization.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

Data, records, relay, or coordination component for cleaner routing, stronger audit trails, and dependable communications. Tuned for tx-command attachment-kit coverage.

Shoulder/back comm uplink spine with compact authority beacon. Designed for KX7 Security security variants.

Close-mounted waist tool caddy for command support tasks. Designed for TX Command combat variants.

Voice and tone filter for companion, household, reception, and hospitality droids after speaker or profile service.

A low-clearance reader for verifying access panels, service compartments, and sealed courier drop points.

Replacement pin and contact kit for worn service ports, relay sockets, and modular attachment harnesses.

Compact command module near chest or waist with unreadable containment indicators. Designed for DT-9 Shock combat variants.

Protected tactical simulation core in chest or waist command rail. Designed for TX Command combat variants.

Protected vent inserts near existing heat exhausts. Designed for DR-1 Destroyer combat variants.

A compact thermal booster for extended output cycles in hot shops, field clinics, and market stalls.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for power workflows.

A heavy-duty mobility service set for rough-yard stability; on the current hover render it appears as underside traction pad and base-skid service hardware.

Sealed rim plating with frost-safe edge bands and small environmental vents. Designed for PRB-7 Probe security variants.

A compact etiquette and custom-reference archive for ceremony order, greeting rules, honorifics, and taboo avoidance.

Forearm escort-control module with restraint-safe indicator lights. Designed for KX7 Security security variants.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for actuators workflows.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

Read-only diagnostic adapter for bus health checks, live fault capture, and repair-shop intake without rewriting droid configuration.

A lab-grade scanner pod for bioanalysis, anomaly review, and clinical sample checks.

Probe pack for multi-port diagnostics, stress reads, and live bus inspection.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for hc-14 attachment-kit coverage.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for p3-0 attachment-kit coverage.

A subtle collar and head-side lighting array for formal presence, calm announcements, and diplomatic attention control.

A compact projector that casts abstract dock-lane caution shapes during loader movement.

A back-mounted multi-sensor pod for route mapping, compartment identification, low-clearance inspection, and wiring-path discovery.

A compact fold-down back-mounted utility arm for light handoff, small-panel access, and cable-tag placement.

A visible correction module for flight drift, corridor stability, and route-confidence checks.

Visible flexible seals around joints for grit-heavy yards and fabrication bays.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for power workflows.

Visible emergency coupler ports and insulated leads for safe power reroute work.

Small hip or back data uplink with sealed evidence status lights. Designed for RG-88X Hunter combat variants.

Hardened transceiver board with rotating key slots and jam detection.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

A protected field-memory vault for route logs, research scans, and recovery notes.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for hc-14 attachment-kit coverage.

Data, records, relay, or coordination component for cleaner routing, stronger audit trails, and dependable communications. Tuned for tx-command attachment-kit coverage.

An adapter rail for external shop tools and shipboard service docks.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for ra-9 attachment-kit coverage.

Secure log-capture card for preserving diagnostic traces before repair, reset, or upgrade installation.

A stabilized output station for temporary tool banks, emergency lighting, and service-lane power distribution.

All-in-one repair tool for emergency service calls and corridor work orders.

Small sealed firmware access plate with civic status lights. Designed for DR-1 Destroyer combat variants.

A field scanner visor around the head optics for terrain scan and anomaly review.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for tools workflows.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for med-modules workflows.

A controlled sealant reservoir and applicator for pressure leaks, panel seams, and temporary field patches.

A compact PT-3 brace kit for courier depot, field trailer, and mobile service deployment.

Head/shoulder tracking optics and sealed evidence light. Designed for RG-88X Hunter combat variants.

A close-mounted protocol seal for venue rules, formal permissions, restricted-area awareness, and event compliance guidance.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for hc-14 attachment-kit coverage.

Compact back radio pack and shoulder signal tabs. Designed for S1 Infantry combat variants.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for qe-5 attachment-kit coverage.

High-tolerance coupler rail for combat-grade current spikes and surge recovery.

A small environmental vane for gas, heat plume, and airflow hazard detection.

Close-fitting recovery module with civic amber control indicators. Designed for RG-88X Hunter combat variants.

Balances feeder loads across modular bays and reduces connector stress failures.

A lockout-protected cutter for controlled removal of warped plates, seized brackets, and damaged service panels.

Sensor and optics component for cleaner scans, stronger route awareness, and more reliable condition reporting. Tuned for hc-14 attachment-kit coverage.

A polished chest and shoulder intake array for greeting visitors, classifying guest needs, and routing formal reception flow.

Data, records, relay, or coordination component for cleaner routing, stronger audit trails, and dependable communications. Tuned for hc-14 attachment-kit coverage.

A top-shell beacon tracker for marking unstable debris and crew exclusion zones.

Side-mounted prism scanning pod with non-weapon lens housing. Designed for PRB-7 Probe security variants.

A large visible brace spanning the LDR-B shoulders and upper arms for container-scale lifting.

Mobility or manipulator component for smoother motion, safer load handling, and reduced servo strain. Tuned for dt-9 attachment-kit coverage.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for tools workflows.

Small wrist or offhand projector with abstract unreadable tactical shapes. Designed for TX Command combat variants.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for tools workflows.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for optics workflows.

A stabilizer service kit for smoother mobile lab positioning and tray stability.

A close-mounted patch tile carrier for emergency hull and panel closures.

A small patcher for temporary hull and access-panel seals during emergency route recovery.

A pressure-line diagnostic and service kit for hydraulic loops, coolant paths, and utility pipe checks.

Stabilizes high-draw charge cycles for hangar-grade navigation systems deployments.

Impact-rated panel replacement for mid-frame shielded assemblies.

A precise alignment scanner for cybernetic socket mapping and implant-fit planning.

Fictional non-lethal shoulder projector kit for DT-9 containment profiles; requires software governor lock, range-limited simulation profile, and Rocket J certification before use.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for tx-command attachment-kit coverage.

Calibration kit for lift-yokes, cargo clamps, loader braces, and worksite load sensors.

Low-profile antenna array close to the head and shoulder line. Designed for TX Command combat variants.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for tools workflows.

A salvage inventory tagger that marks recovered parts with abstract, non-readable tracking flashes.

A visible collar, throat, and head-side communication array for translation, public announcements, diplomacy, and interspecies liaison.

A lift-field tuning module that smooths heavy or awkward salvage movement.

A PT-3 vehicle-lane interface for syncing with lift arms, bay stops, and jack safety interlocks.

Close-fitting armor plate replacements and service tabs. Designed for S1 Infantry combat variants.

Large visible actuator collars mounted to existing limbs. Designed for S2 Heavy combat variants.

A visible servo governor that prevents overstrain and keeps load movements within certified tolerances.

Low-lux sensor package tuned for dim corridors and cockpit maintenance checks.

Low-profile underside repulsor rings and quiet hover stabilizers. Designed for PRB-7 Probe security variants.

Matte acoustic armor overlays and dark edge dampening panels. Designed for CX Commando security variants.

A stabilizer collar that keeps ORB-8 sensor head aligned while the sphere rolls.

A magnetic underside cradle that holds irregular scrap close beneath the SVR-100 shell.

A visible throat and chest acoustic module that stabilizes voice cadence for de-escalation, mediation, and high-stress conversation.

Single-service validation card for checking sterile-field emitters, cleanbay sensors, and medical module readiness.

Swap cartridge for integrated med scanners with enhanced anomaly mapping.

Data, records, relay, or coordination component for cleaner routing, stronger audit trails, and dependable communications. Tuned for p3-0 attachment-kit coverage.

A micro-actuator tuning kit for precise surgical/cybernetic manipulator control.

A small diagnostic probe for field docks, nav ports, and research equipment handshakes.

Multi-spectrum lens array for high-fidelity scan paths and range confirmation.

A mobile medbay interface for certified equipment handshakes and recovery routing.

A compact extra recovery pod with small auxiliary claws for fine salvage extraction.

A reach and positioning upgrade for deep bay access, overhead module alignment, and awkward structural repairs.

A monitor adapter for line checks, equipment status, and bedside routing.

A rugged output harness for separating steady, surge, sensitive, and intermittent load clusters.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for optics workflows.

Compact torch and feed kit for precision weld seams and shield brackets.

Reference card for comparing route-cache drift, nav parity errors, and cockpit handshake anomalies.

A calibration node for cybernetic signal baselines and feedback-loop tuning.

A slim back-mounted coordination module for shift dispatch, itinerary control, staff routing, and service-window optimization.

Data, records, relay, or coordination component for cleaner routing, stronger audit trails, and dependable communications. Tuned for tx-command attachment-kit coverage.

Service kit for cleaning lens housings, reseating optical seals, and preparing optics for calibration.

A visible scanner boom and lens cluster for reading mineral density and void risk.

A compact waist or forearm scanner that reads pallet edges, rack spacing, and load-center drift.

A protected library module for pathogen screening and clinical research references.

Unreadable warning light bar and soft amber perimeter indicators. Designed for DR-1 Destroyer combat variants.

Bench calibration kit for steady receptor gain curves and color correction.

A visible pilot-assist light and comm package for cockpit-adjacent route callouts.

A compact PT-3 lane-status beacon for crowded repair floors and high-tempo service bays.

A refined head and collar translation array for dialect resolution, tonal matching, and mixed-party speech clarity.

A compact assessment pack for post-install motion checks and recovery review.

Fine-tolerance couplers for starfighter and interceptor nav-port handshakes.

A recalibration pack for fine hand and instrument coordination.

Fine-control servo bundle for posture systems and micro-manipulation routines.

Micromotion manipulator assembly for surgical suture and closure routines.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

Customer-data safety module that protects private logs during repair, resale preparation, and certification.

Collar comm module with short-range privacy screen emitter. Designed for MG-200 Guard combat variants.

A compact projection system that creates privacy-safe viewing fields for sensitive intake and compliance records.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

A sealed glossary memory module for private terms, protected names, negotiated definitions, and sensitive translation context.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for power workflows.

A compact visible scheduling and queue-status display integrated into the chest or forearm.

An intake classification console for sorting visitors, forms, service requests, appointments, and escalation paths.

Quiet actuator tuning hardware for smoother care-arm cycling in recovery bays.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for actuators workflows.

A filtered inverter module for low-noise protected output around scanners, terminals, and clinical support equipment.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for plating workflows.

Close-mounted actuator damper set for quieter patrol stance, smoother escort movement, and reduced servo strain. Designed for KX7 Security security variants.

A close-mounted PT-3 service tray that stages the next tool or connector set for fast bay turnaround.

A compact sensor mast for fast terrain tagging and rolling scout sweeps.

Data, records, relay, or coordination component for cleaner routing, stronger audit trails, and dependable communications. Supports shared attachment-kit coverage across 2 Droid Shop models.

A compact archive module for intake records, service notes, queue histories, compliance forms, and private staff routing data.

A compact dashboard module for bed status, handoff routing, and recovery flow.

Data, records, relay, or coordination component for cleaner routing, stronger audit trails, and dependable communications. Tuned for dt-9 attachment-kit coverage.

Data, records, relay, or coordination component for cleaner routing, stronger audit trails, and dependable communications. Tuned for tx-command attachment-kit coverage.

Compact rear torso cooling fins and protected thermal vents. Designed for CX Commando security variants.

Chassis, shell, or environmental hardening component for improved durability and field-service protection. Tuned for dt-9 attachment-kit coverage.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for plating workflows.

Reinforced knee, hip, elbow, and shoulder collars close to the body. Designed for KX7 Security security variants.

A visible shoulder and upper-back yoke that braces large loads close to the LB-7 frame.

Heavy plate overlays on existing armor surfaces only. Designed for S2 Heavy combat variants.

A broad shoulder carriage that spreads lift forces across the loader torso.

Protocol-safe handshake module for authenticated relay negotiation.

Tamper-evident certification seals applied after Rocket J diagnostic, repair, or upgrade completion.

Diagnostic ring for hover, balance, spherical-drive, and lift-field stability checks.

A compact stabilizer pack that keeps the tall platform balanced over unstable terrain.

Close-mounted brace arms or support pads for extraction cover. Designed for S2 Heavy combat variants.

A tow and drag harness for moving disabled equipment or clearing personnel-safe pathways.

Forearm interceptor guard and restraint-safe contact pads. Designed for MG-200 Guard combat variants.

Compact pursuit calibration module and visible restraint-safe tuning marks. Designed for RG-88X Hunter combat variants.

Ring assembly for stabilized retinal tracking and patient scan targeting.

Broad left forearm riot shield and right-hand electric shock baton/mace. Designed for DT-9 Shock combat variants.

A distributed low-power beacon kit for reliable route confirmation in corridors, workshops, and shipboard service lanes.

Legacy ND-1 route beacon component. The current canonical ND-1 Addon is Route Marker Spool.

A protected route-memory module for return paths, map continuity, and emergency route recovery.

A compact marker spool for physical path marking, beacon drops, and route breadcrumbs.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

Repair-shop harness for validating safety governors, containment locks, and policy-bound operating profiles.

Multi-fit gasket bundle for chassis seams, wet-weather seals, and dust hardening.

A sealed sample intake bay for controlled research specimen handling.

Temporary diagnostic gasket used to verify chassis seal integrity before installing permanent weather or dust seals.

Shoulder/collar comms node with short encrypted antenna tabs. Designed for CX Commando security variants.

A compact secure interface probe for docks, nav consoles, and emergency tool ports.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

Legacy ND-1 secure memory component. The current canonical ND-1 Addon is Encrypted Memory Vault.

Replacement board for secure scomp negotiation and link persistence.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for optics workflows.

Top-mounted folding sensor mast with small cyan scan lights. Designed for PRB-7 Probe security variants.

Small shoulder/back sensor mast that reads as optics, not a cannon. Designed for CX Commando security variants.

Data, records, relay, or coordination component for cleaner routing, stronger audit trails, and dependable communications. Tuned for qe-5 attachment-kit coverage.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for tools workflows.

General-purpose actuator pack for tool-arm articulation and hatch rotation.

Protected servo collars on shoulders, elbows, and knees. Designed for MG-200 Guard combat variants.

Compact shield emitter nodes integrated into the outer ring. Designed for DR-1 Destroyer combat variants.

Data, records, relay, or coordination component for cleaner routing, stronger audit trails, and dependable communications. Tuned for qe-5 attachment-kit coverage.

Flexible underlay to reduce vibration transfer to core logic housings.

Prominent shoulder cannon scaled like DT-9 alt 1, mounted over one shoulder. Designed for DT-9 Shock combat variants.

Small shoulder sensor puck with unreadable status lights. Designed for TX Command combat variants.

Directional antenna mast for long-bay telemetry and convoy routing.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for plating workflows.

A nonverbal loader-status beacon for crew-safe movement in loud dock environments.

A rugged mesh intake screen that separates usable material from hot slag and debris.

Padded restraint module mounted close to hip or forearm. Designed for MG-200 Guard combat variants.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

Small low-profile stabilizer claws close to existing feet/arm supports. Designed for DR-1 Destroyer combat variants.

Gimbal set for smooth posture corrections and camera stabilization under motion.

Localized sterile envelope emitter for trauma suites and surgical prep.

A close-mounted sterile prep module for implant sockets and cybernetic interface surfaces.

Close-fitting sterile caps and utility tips for MX-7T care arms.

A shared sterile-field support module for research containment and clean sample handling.

Precision prism housing for targeting overlays and encrypted reticle sync.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for tools workflows.

Chest or shoulder camera recorder with sealed audit lens. Designed for KX7 Security security variants.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

Rugged footpad overlays for field exploration, uneven terrain, and climb-path stability.

Legacy ND-1 terrain scanner component. The current canonical ND-1 Addon is Field Scanner Visor.

Protected rear heat sink and thermal cells. Designed for S2 Heavy combat variants.

Close-fitting thermal fins for hard-weather flightline cycles.

Replacement wafer set for heat transfer paths, processor coolers, and compact power corridors.

A heat-rated scoop and basket assembly mounted under the narrow MNG-27 body for ore collection.

Protected cooler module behind shoulder or upper back. Designed for DT-9 Shock combat variants.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for p3-0 attachment-kit coverage.

High-cycle pivot motor replacement for navigation systems auxiliary arm mounts.

Reinforced gear train for high-load servo channels and stabilization loops.

A PT-3 safety coupler that prevents over-torque during fast actuator, wheel, hatch, and connector service.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for actuators workflows.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for optics workflows.

A visible emergency stabilization module for trauma intake and procedure readiness.

Validated decision-tree module for intake triage and escalation ordering.

Converts irregular dock power into smooth tri-phase output for language-core hardware.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for actuators workflows.

Shop-service component for maintenance, repair support, configuration work, and safe field readiness. Tuned for comms workflows.

Compact folded flight hardware behind the shoulders using DT-9 alt 3 as accessory reference. Designed for DT-9 Shock combat variants.

Slim back convoy relay and shoulder escort lights. Designed for MG-200 Guard combat variants.

A visible vitals sensor array for continuous recovery-bay monitoring.

Legacy ND-1 weatherization component. The current canonical ND-1 Addon is Weather-Seal Shell style hardware for Navigation field work.

A field casing kit that protects ports, vents, and controls from dust, rain, and rough handling.

Close-fitting sealed shell trim for field scouting in dust, rain, and rough hangars.

Expanded but close-mounted sensor arc around the head/shoulder line. Designed for RG-88X Hunter combat variants.

Sensor and optics component for cleaner scans, stronger route awareness, and more reliable condition reporting. Tuned for qe-5 attachment-kit coverage.

A low-profile warning beacon for crew-safe yard movement and controlled load staging.